CinemaCon 2011 – 17 – Digital Changes – Michael Karagosian

Writing by jamieg on Monday, 13 of June , 2011 at 10:13 pm

Michael Karagosian of mkpe gives us a run down on future developments in digital cinema.  From Laser Light sources to the evolution of the software used in d-cinema.  There is still a lot going on.

sponsor: www.dcpPlayer.net

http://www.d-cine.net/cinetechgeek/CinemaCon2011-DigitalChanges-4-MichaelKaragosian_itunes_1.mp4

 

Leave a comment

Category: Audio,CinemaCon,cinemas,DCI,dCinema

CinemaCon 2011 – 16 – Digital Changes – James Kang

Writing by jamieg on Monday, 13 of June , 2011 at 10:09 pm

James Kang from DCK (D-Cinema Korea) explains how Korea became one of the most progressive countries converting to Digital.  Korea is on track to be one of the first countries that archives full digital conversion.

Sponsor: www.dcpPlayer.net

http://www.d-cine.net/cinetechgeek/CinemaCon2011-DigitalChanges-3-JamesKang_itunes.mp4

 

Leave a comment

Category: CinemaCon,cinemas,DCI,dCinema,VPF

CinemaCon 2011 – 15 – Digital Changes – Steve Perrin

Writing by jamieg on Sunday, 12 of June , 2011 at 8:36 am

Steve Perrin, head UK digital funding group, gives us a rundown on how the VPF is working in his part of the world.

Sponsor: dcpPlayer.net

 

Leave a comment

Category: CinemaCon,cinemas,DCI,dCinema,VPF

CinemaCon 2011 – 14 – Digital Changes – David Hancock

Writing by jamieg on Sunday, 12 of June , 2011 at 8:26 am

David Hancock of Screen Digest gives us a rundown on the developments in Cinemas going digial.

This is of special interest as the forcast of how long until we are fully digital is very enlightening.

 

Sponsor: dcpPlayer.net

 

Leave a comment

Category: CinemaCon,cinemas,DCI,dCinema

CinemaCon 2011 – 12 – Mikrom IMB

Writing by jamieg on Friday, 29 of April , 2011 at 12:46 am

Mikrom, an Integrated Media Block (IMB) manufacturer gets us up to date with what an IMB is and why we need them in the world of 4K and faster then 24 fps presentations.

 

 

Leave a comment

Category: 3D,CinemaCon,DCI,dCinema

CinemaCon 2011 – 11- DepthQ 3D

Writing by jamieg on Friday, 29 of April , 2011 at 12:40 am

DepthQ has released a new 3D system similar to RealD but with an outright purchase.  This video shows you the unit working and how DepthQ have improved on the design over the older RealD Z-screen units.

 

 

Leave a comment

Category: 3D,CinemaCon,cinemas,DCI,dCinema

CinemaCon 2011 – 10 – Perforated Screen with Severtson

Writing by jamieg on Friday, 29 of April , 2011 at 12:34 am

Perforated screens or screens with small holes in them so the sound can pass through with less destortion, can be a major problem in the digital age.  The perforated pattern and the pixel grid in the projector can interfere producing a visible moire pattern on screen.

Ron from Severtson Screens tells us how we can deal with these issues.

 

 

Comments (2)

Category: CinemaCon,cinemas,DCI,dCinema,eCinema,showest

CinemaCon 2011 – 07 – Cameron, Lucas, Ketzenberg on future of Film, Part6

Writing by jamieg on Thursday, 14 of April , 2011 at 9:40 am

Part6
In this 1h10m video James CameronGeorge Lucas and Jeffery Katzenberg talk about the innovative production technologies they are looking at moving forward.

Much is covered.

  1. Faster frame rates
  2. 4K resolution.
  3. 3D and how it is developing/improving (And how we archive this).
  4. Post production work flows and how they are effected.
  5. new developments in the speed of rendering for CG/VFX and animated content.
  6. Production budgets and how they are effected.
  7. 3D production work flow topics by James.

And it goes on.
A must see for those in the production industry.

Sponsored by dcpPlayer by digitAll

 

 

Leave a comment

Category: 3D,CinemaCon,DCI,dCinema

CinemaCon 2011 – 06 – Cameron, Lucas, Ketzenberg on future of Film, Part5

Writing by jamieg on Thursday, 14 of April , 2011 at 9:35 am

Part5
In this 1h10m video James CameronGeorge Lucas and Jeffery Katzenberg talk about the innovative production technologies they are looking at moving forward.
Much is covered.
  1. Faster frame rates
  2. 4K resolution.
  3. 3D and how it is developing/improving (And how we archive this).
  4. Post production work flows and how they are effected.
  5. new developments in the speed of rendering for CG/VFX and animated content.
  6. Production budgets and how they are effected.
  7. 3D production work flow topics by James.

And it goes on.
A must see for those in the production industry.

Sponsored by dcpPlayer by digitAll

 

 

Leave a comment

Category: 3D,CinemaCon,cinemas,DCI

CinemaCon 2011 – 05 – Cameron, Lucas, Ketzenberg on future of Film, Part4

Writing by jamieg on Thursday, 14 of April , 2011 at 9:33 am

Part4
In this 1h10m video James CameronGeorge Lucas and Jeffery Katzenberg talk about the innovative production technologies they are looking at moving forward.

 

Much is covered.

  1. Faster frame rates
  2. 4K resolution.
  3. 3D and how it is developing/improving (And how we archive this).
  4. Post production work flows and how they are effected.
  5. new developments in the speed of rendering for CG/VFX and animated content.
  6. Production budgets and how they are effected.
  7. 3D production work flow topics by James.

And it goes on.
A must see for those in the production industry.

Sponsored by dcpPlayer by digitAll

 

 

Leave a comment

Category: 3D,CinemaCon,DCI,dCinema

Author

CineTechGeek is James Gardiner, a part owner in DCN (Digital Cinema Network Australia - www.dcnaustralia.com.au) and digitAll (www.digitall.net.au) and is involved in the installation and development of DCI d-Cinema and e-Cinema projection systems. Cine Tech Geek is an informative video blog which will explain the details and reality of the future of Cinema.

Disclaimer: This is a personal weblog. The opinions expressed here represent my own and not those of my employer(s).